Delta Properties Infrastructure Phase 5B Improvements

Source scope cues include: Note: If you have a USB connection port and a DC3 or DC3S serial data cable, a USB-to-Serial adapter cable will be required.; first download any data you wish to save.; to the matching socket on your meter or data logger.; Any data logger with a start date of 00/00/2000 has not been initialized.; The K-Factor is the number of pulses per gallon produced by the Seametrics meter your Data Logger is reading from.; Loggers when you analyze your data.; from another during data analysis (e.; Longer cycle times give less detailed data over a longer time period.; data and begin overwriting the earliest measurement data points.; though the earlier specific data points are overwritten.; overwriting the first data set or incrementing the file name to save both data sets.; total units, and the portion of the data collection period that you wish to view (displayed on the Y axis).; There are several ways to select and refine the desired portion of your collected data to view.; Viewing the Entire Time Period: When you download your data, a graph line will appear on the empty grid.; If your data is too condensed to read.; period as you wish (down to a minimum of two data points)..